Connecting a Cash Drawer to IZI
Esta página aún no está disponible en tu idioma.
Connecting a Cash Drawer to IZI
Section titled “Connecting a Cash Drawer to IZI”The cash drawer opens automatically when a payment is processed through IZI. It connects to the cash register station — directly via USB or through a receipt printer via RJ11 cable.
What You’ll Need
Section titled “What You’ll Need”- Cash drawer (standard size 330×380mm or similar — one option depending on budget)
- RJ11 cable (included with most drawers) or USB cable
- A connected and configured receipt printer — if using RJ11 connection (see Connecting a Receipt Printer)
- Access to IZI CRM settings
Connection Types
Section titled “Connection Types”| Type | How It Works | When to Use |
|---|---|---|
| RJ11 through printer | Drawer connects to the “Cash Drawer” port on the printer. Open command goes through the printer | Most budget drawers |
| USB direct | Drawer connects to a USB port on the cash register station. Separate driver | Drawers with USB interface, no printer |
| Serial (COM) | Legacy interface, found on old equipment | Compatibility only |
Step 1. Connect the Drawer
Section titled “Step 1. Connect the Drawer”Option A — Through a printer (RJ11):
Find the connector labeled DK (Drawer Kick) or Cash Drawer on the back panel of the receipt printer — usually an RJ11 socket (resembles a phone connector). Connect the drawer cable into this socket.
The drawer receives the open command from the printer: when IZI sends a “open drawer” command, the printer translates it into an electrical pulse via the RJ11 cable.
Option B — Via USB:
Connect the drawer’s USB cable to the cash register station. Windows will detect the device automatically or require a driver from the manufacturer.
Step 2. Check the Register in IZI
Section titled “Step 2. Check the Register in IZI”CRM has no separate cash drawer settings. IZI works with the receipt printer or fiscal register through a cashbox provider — set it up following Connecting a Receipt Printer. An RJ11 drawer gets the open command from the printer.
Troubleshooting
Section titled “Troubleshooting”| Symptom | Cause | Solution |
|---|---|---|
| Drawer won’t open with any action | Cable not connected or wrong port | Check RJ11 in the printer’s DK connector |
| Drawer opened once then stopped | Printer went offline | Check printer status in Windows |
| Drawer opens by itself | Mechanical problem or short in cable | Replace RJ11 cable |
Related
Section titled “Related”- Connecting a Receipt Printer — required for RJ11 connection
- Connecting a Barcode Scanner
- IZI System Requirements
See Also
Section titled “See Also”Preguntas frecuentes
Is a receipt printer required for the cash drawer to work?
For RJ11 connection — yes. The drawer connects to the printer, and the open command goes through it. For USB connection — no printer needed. Check the type of connector on your drawer.
Can a cash drawer be connected without a receipt printer?
Yes — if the drawer has a USB or Serial (COM port) interface. Most budget drawers use RJ11 through a printer. USB-connected models cost slightly more but don't require a printer to operate.
IZI LLC (ООО «ИЗИ»), TIN 7842227686, OGRN 1257800012249, office 1, premises 3-N, lit. A, 15-17 Perekupnoy lane, Saint Petersburg, 191024, Russia, admin@izi.is · Cookie settings