TrueNAS Server for IZI Boot: Connection, Migration and Switchover
Este conteúdo não está disponível em sua língua ainda.
TrueNAS Server for IZI Boot
Section titled “TrueNAS Server for IZI Boot”Size the drives for your game library and the number of PCs. IZI Boot keeps one shared image on TrueNAS and gives each PC its own clone over the network (iSCSI). Use this guide to check connection settings or move games from another system. Step-by-step IZI Boot setup · Supported TrueNAS versions
What IZI Boot Does on the Server
Section titled “What IZI Boot Does on the Server”- The reference is a separate volume on the TrueNAS pool. Each PC gets its own clone of it, which only takes space for that PC’s changes.
- One iSCSI target per PC. Only that PC can connect to it — by the initiator name
iqn.2016-06.is.izi:<PC id>. Another PC will not see its disk. - A shared portal
0.0.0.0:3260. All IZI Boot targets are served through it. IZI Boot turns the iSCSI service on by itself. - Drive letter. On the PC the game volume is attached to the letter you chose during setup. The system drive C: stays local.
How to choose drives and estimate capacity
Section titled “How to choose drives and estimate capacity”RAIDZ1 with three equal-size drives is a budget option that tolerates one drive failure. Size the drives for your game library and its expected growth. Larger drives can take longer to rebuild. If a second drive fails in the same RAIDZ1 group before the rebuild finishes, the pool is lost. Choose RAIDZ2 if the group needs to survive two drive failures. TrueNAS recommendations
| Layout | Drive failures tolerated | Example capacity with four 4 TB drives | | --- | ---: | ---: | | Stripe | 0 | ≈ 16 TB | | RAIDZ1 | 1 | ≈ 12 TB | | RAIDZ2 | 2 | ≈ 8 TB |
The table shows group capacity before ZFS overhead. Parity is spread across the drives in the group. The TrueNAS boot drive is separate. TrueNAS pool layouts
Games are stored once in a shared image. When a PC downloads an update to its game drive, the new writes take up space in that PC’s clone. Start with 25 GiB per PC and increase it if updates on a single PC need more room. The estimate leaves 20% of the pool free and subtracts the headroom for all PCs from the remaining 80%. When creating a volume, TrueNAS also checks its size against the free space. TrueNAS volume size check
A 4 TB drive has about 3.64 TiB before partitioning and ZFS overhead. How TB converts to TiB
Check the actual drive sizes and layout in TrueNAS. The smallest drive sets the per-drive capacity of each RAIDZ group. With six identical 2 TB drives, two three-drive RAIDZ1 groups give about 8 TB, while one six-drive group gives about 10 TB before ZFS overhead. How OpenZFS estimates group capacity
Enter the drives in a single group of equal-size drives. For a pool you have already set up, check its actual usable capacity under Storage in TrueNAS.
Storage calculator
Enter the number of PCs and any two of these values: drive count, drive size, and space needed for games.
- Estimated space for games
- Headroom for all PCs
- Minimum number of drives
- Minimum size per drive
Fill in the fields to see the estimate.
The IZI Boot donor volume setting has a limit of 10,240 GiB.
Estimate before ZFS overhead. Before buying drives, check the capacity with the TrueNAS calculator.
Connecting: What to Enter
Section titled “Connecting: What to Enter”| Field | What to enter | | -------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------- | | Address and port | The address the IZI cloud uses to reach the TrueNAS API: an external IP or a hostname with a port forward. | | API token | Created in TrueNAS. Hidden after saving. | | Web UI username and password | Required on first connection, checked on the server itself. This is the access IZI support uses in an emergency and to upgrade TrueNAS. | | Drive letter | The game drive letter on the PCs, any except C:. IZI checks on save that it is free on every PC. | | Pool | Can be left empty if the server has a single pool. | | Donor volume size | 1–10,240 GiB, with headroom for a growing game library. | | Auto-update schedule | Required. Defaults to “Always”. | | Alert channel | A Telegram integration for server health notifications. |
Detected automatically, not entered: the protocol (HTTP or HTTPS), the server’s LAN addresses the PCs connect disks to, and the TrueNAS version.
Migrating from a Previous System on the Same Server
Section titled “Migrating from a Previous System on the Same Server”If another network boot system already runs on the TrueNAS, the setup wizard offers to take one of its disks as the reference.
- Games are kept if you choose the previous system’s main disk. Per-PC disks are clones of the main one, and the wizard marks them separately. A clone as the reference would capture one PC’s “dirty” state.
- No copy — instant, needs no extra space.
- Full copy — needs free pool space at least the size of the disk. Large disks may take several hours.
If the server is behind Cloudflare Access and the club’s own system runs on it, IZI Boot removes nothing and does not take a foreign disk as the reference.
Switchover Step by Step
Section titled “Switchover Step by Step”- A window with no players. During the switch the PCs stop seeing the previous disks.
- The CRM wizard: connection → check → mode → source → reference → PC selection → installation. Details in How to Configure IZI Boot and the Disk Image.
- First start on each PC. The IZI client sets the PC’s initiator name and attaches the game volume to the chosen letter.
- Check. The last wizard step shows how many PCs are already connected out of the total. PCs that are off or busy connect on their own once free.
Related
Section titled “Related”Perguntas frequentes
How much space should I leave for changes on each PC?
Start with 25 GiB per PC using IZI Boot. Allow more if updates on a single PC need extra space. Also leave 20% of the pool capacity free when sizing the drives.
Will the games survive a switch to IZI Boot from another system?
Yes, if you choose the previous system's main disk as the reference, not a single PC's own disk. The setup wizard marks those per-PC disks as clones.
What does IZI Boot remove from the server after the migration?
Once the reference exists, IZI Boot removes previous-system objects nobody is connected to: iSCSI targets, LUNs, initiator groups, portals and volumes (zvols) outside the reference chain — including the previous system's per-PC disks and other images. Regular file datasets are not touched.
Why does IZI Boot need the TrueNAS web UI username and password?
It is the access for emergencies and for upgrading the server: IZI support uses it to help the club and to upgrade TrueNAS. The pair is checked on the server itself when you first connect.
IZI LLC (ООО «ИЗИ»), TIN 7842227686, OGRN 1257800012249, office 1, premises 3-N, lit. A, 15-17 Perekupnoy lane, Saint Petersburg, 191024, Russia, admin@izi.is · Cookie settings