Pular para o conteúdo

Connect CCBoot to IZI

Опубликовано: · Обновлено: (5 дней назад)· IZI Team

Este conteúdo não está disponível em sua língua ainda.

CCBoot Cloud stores a shared Windows image on the club server and boots gaming PCs over the network. IZI connects through the iCafeCloud API to power on PCs and update the IZI client in the shared image from Control Center. Follow these steps to grant API access and complete the connection in IZI CRM.


RequirementDetails
Working CCBoot CloudThe club’s iCafeCloud panel has a Boot page, PCs and an assigned Windows image.
iCafeCloud Admin accountObtain access from the license owner. This account can create an API token.
IZI outgoing IP81.26.188.3, the fixed address to enter in API Access IP.
IZI Boot configuration accessA staff account with BOOT_CONFIG_MANAGE permission.
IZI client in the shared imageContact IZI support for initial image preparation in diskless mode. After booting, the PC appears in CRM with its Windows computer name.

  1. Sign in to the iCafeCloud cloud panel as Admin.
  2. Open «Settings» → «API settings».
  3. Enter 81.26.188.3 in API Access IP. If other services already have addresses there, append 81.26.188.3 with a comma and retain the existing entries.
  4. Copy License ID. This is the Cafe ID used in IZI CRM.

iCafeCloud API settings showing License ID, API access IP and Create

Screenshot from iCafeCloud API settings. The image shows example values; use your own License ID and the IZI address 81.26.188.3.

IZI sends requests through a dedicated proxy with the reserved static address 81.26.188.3. The address stays assigned when the proxy server is replaced.


  1. Click Create on the same page.
  2. Confirm with Yes.
  3. Click Copy and store the token in a password manager. The issuance window displays it once.

iCafeCloud confirmation for creating an API key, with Yes highlighted

Source: iCafeCloud API settings.

iCafeCloud supports one API key per license. Creating a new key replaces the previous one, so coordinate the update across services using the license API. A key is valid for one year. When moving the license to another iCafeCloud server group, issue a fresh key and update the IZI connection.


In IZI CRM, open Settings → Equipment → Zones and enable Diskless zone for zones containing CCBoot PCs. The mode is editable while the zone is empty and becomes fixed after devices are added. See zone setup.

Assign the CCBoot PCs to these zones. The Boot page has separate system selections for zones with local disks and diskless zones. CCBoot serves the club’s diskless zones.


Open Settings → Equipment → Game storage, and in the Diskless zones block click Set up → on the CCBoot card.

CRM fieldValue
Cafe IDNumeric License ID from iCafeCloud.
API URLhttps://api.icafecloud.com, already filled in.
API tokenThe value copied after Create. Paste the token itself; IZI constructs the authorization header.

Click Save, then Test connection. IZI requests the club’s boot PC list from iCafeCloud. A successful result confirms API access with the saved parameters.

The Connected label means a configuration has been saved. Test connection reports the result of contacting iCafeCloud.

The token is hidden after saving. To replace it, click Change beside the token field, enter the current key and save. Editing Cafe ID or API URL keeps the stored token in use.


Open Boot → Computers in iCafeCloud and the same device’s details in IZI. Match the full Windows computer name exactly to the CCBoot PC name, including case and leading zeros.

ValueExample
CCBoot PC namePC01
Windows computer name reported by the IZI clientPC01
Seat number in CRM01

IZI finds the CCBoot PC by its full computer name. The seat number identifies the place in the hall. Also confirm the PC’s assigned boot image: updating the client writes to that image.

Connection complete: the configuration is saved, the connection check succeeded, PCs belong to diskless zones and their computer names match CCBoot.


Choose an idle PC with a working IZI client. It becomes the shared image editor and goes through two reboots. Update each image through one PC at a time.

  1. In Control Center, open the selected PC’s command menu → Update boot image.
  2. Click Start.
  3. Follow the stages: enable Super Client → update the client in the image → save to the image → return to normal mode.
  4. Wait for completion. Then reboot the other idle PCs using that image to load the saved client version.

You can close the operation window: progress stays on the PC tile and the update continues on the server.

When CRM asks you to enable Super Client manually, open iCafeCloud → Boot → Computers, right-click the same PC → Enable super client, select its image disk and click OK. IZI continues after the mode is enabled.

CCBoot Cloud PC menu with Enable super client highlighted

Source: CCBoot Cloud Super client.

When CRM requests a manual save, shut down the editor PC. Once it shows Offline, choose Disable super client, select Update the Image, add a description and click OK. Wait for saving to finish.

Disable super client dialog with Update the Image and an update description

Source: CCBoot Cloud Super client.


SituationAction
API authorization errorConfirm API Access IP contains 81.26.188.3, check key expiry and confirm the token saved in CRM is current. Save a replacement key in IZI after issuing it.
Url not match responseMatch Cafe ID to the club’s License ID and API URL to https://api.icafecloud.com.
API rate limitWait for the iCafeCloud limit to clear, then repeat the connection check.
Timeout or API connection errorSend IZI support the club name, time and CRM message so they can inspect the iCafeCloud connection.
Connection succeeds and a command for one PC failsMatch its zone, full Windows name, CCBoot name and assigned image.
Image already has an active updateWait for the current image update to finish.
Editor PC requires its connection restoredReboot it and wait for it to come online in IZI. The operation continues when the connection returns.

Perguntas frequentes

Which address goes into API Access IP?

Enter 81.26.188.3, the fixed outgoing IP of the IZI integration. IZI sends iCafeCloud requests through its dedicated proxy at this address.

Where do I find the Cafe ID?

Open Settings → API settings in iCafeCloud and copy License ID. The identifier is also shown in your iCafeCloud license.

How does IZI match a PC to CCBoot?

Assign the PC to a diskless zone in IZI and match its full Windows computer name to its CCBoot name, such as PC01. IZI uses this name to find the PC.

What does Update boot image do?

It updates the IZI client in the shared image through Super Client: enables editing, installs the client, saves the image and returns the PC to normal mode.

About IZI